PDA

View Full Version : 2006 RX 50 Racing


TheRidersForum
03-01-06, 21:43
59

Engine
Single cylinder, 2 stoket, liquid cooling, reed-valve induction. Balance shaft.

Bore & Stroke
40,3 x 39mm

Cylindrical capacity
49,7 cm³

Compression Ratio
12:1

Carburettor
Dell’Orto PHBN 16

Ignition unit
Electronic capacitive discharge

Starting
Kick start

Generator
12V-85W

Lubrication
Separate mixing variable capacity load

Gears
Six Speeds

Primary Transmission
Helicoidally shaped teeth Gears

Final Transmission
Chain

Frame
closed split cradle frame, high durability steel tubes

Suspensions
Front: up side down fork with,40mm stanchions, wheel excursion 260mm
Rear: Oscillating, steel swing arm with rectangular profile, assembled on needle roller bearings , hydraulic mono-shock absorber piggy back, wheel travel 260mm

Brakes
Front: disc, Ø 250mm, floating caliper with twin parallel pistons
Rear: disc, Ø 220mm, fixed caliper with twin opposing pistons

Wheels
Aluminium, front: 1,60”x 21”; rear: 1,85”x18

Tyres
Front:80/90 x 21”;rear:110/80 x 18”

Dimensions
Max length mm2060
Max wideness 880mm up to handlebar, 930 with mirror
Max height 1450 up to mirror
Wheelbase 1400mm
Minimum free height from ground 350mm
Saddle height: 940mm

Weight with liquids but without fuel
98 kg

Tank Capacity
9,5 litres (fuel reserve :1,5 litres)

Exhaust Set-up
Exhaust pipe with catalyser

Engine Ecologic with EURO 2 emissions